Queens Park Fencing Contractor – Colorbond, Timber, Pool & Gates

Bondi, Bronte, Tamarama, Dover Heights and Bondi Junction – dense beachside living with semi-detached homes, apartments and renovated bungalows on small blocks.

What we install in Queens Park

Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Fence and gate repairs – leaning posts, storm damage, insurance repairs and gates that will not latch
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates

Local notes for Queens Park

What we look for at the measure in Queens Park – sandstone cliffs and sandy slopes to the beaches; salt air throughout.

Privacy screens between closely spaced homes are the usual brief.
Small blocks share long side fences with one neighbour; we quote for both parties and work from narrow side passages.
Salt exposure is severe – aluminium slat, louvre and flat top fencing for anything open or near the coast.

We are a service-area business: there is no showroom in Queens Park. We travel to you for a free measure and quote.

Free quote in Queens Park

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Waverley Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Waverley Council has heritage conservation areas across Bondi, Bronte and Waverley with front-fence controls; coastal overlays also apply. Council website.

All Waverley suburbs →

Nearby areas

All service areas →

Fencing questions in Queens Park

Do you service Queens Park?

Yes. Queens Park is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Queens Park?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Waverley Council has heritage conservation areas across Bondi, Bronte and Waverley with front-fence controls; coastal overlays also apply. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Waverley Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Queens Park neighbour, and can quote each side separately if you prefer.

Do you do supply only?

Yes. Colorbond panels, aluminium flat top and slat kits and gates can be supplied to Queens Park for you or your builder to install – ask for a supply-only price on the quote form.

Which Colorbond colour suits Queens Park?

Monument, Woodland Grey, Basalt and Surfmist are the most chosen colours across Waverley; two-tone fences (one colour for sheets, another for posts and rails) cost no more. See the Colorbond colour chart for exact swatches.