Bondi Beach Fencing Contractor – Colorbond, Timber, Pool & Gates

Bondi, Bronte, Tamarama, Dover Heights and Bondi Junction – dense beachside living with semi-detached homes, apartments and renovated bungalows on small blocks.

What we install in Bondi Beach

Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Fence and gate repairs – leaning posts, storm damage, insurance repairs and gates that will not latch
Security fencing – 2.1 m steel security panels, roll top and sliding gates for schools, churches and commercial sites
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts

Local notes for Bondi Beach

What we look for at the measure in Bondi Beach – sandstone cliffs and sandy slopes to the beaches; salt air throughout.

Salt exposure is severe – aluminium slat, louvre and flat top fencing for anything open or near the coast.
Small blocks share long side fences with one neighbour; we quote for both parties and work from narrow side passages.
Privacy screens between closely spaced homes are the usual brief.

We are a service-area business: there is no showroom in Bondi Beach. We travel to you for a free measure and quote.

Free quote in Bondi Beach

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Waverley Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Waverley Council has heritage conservation areas across Bondi, Bronte and Waverley with front-fence controls; coastal overlays also apply. Council website.

All Waverley suburbs →

Nearby areas

All service areas →

Fencing questions in Bondi Beach

Do you service Bondi Beach?

Yes. Bondi Beach is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Bondi Beach?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Waverley Council has heritage conservation areas across Bondi, Bronte and Waverley with front-fence controls; coastal overlays also apply. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Waverley Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Bondi Beach neighbour, and can quote each side separately if you prefer.

How soon can you start in Bondi Beach?

Usually within one to two weeks of you accepting the quote, weather permitting. Most residential fences are finished in one to two and a half days.

Which Colorbond colour suits Bondi Beach?

Monument, Woodland Grey, Basalt and Surfmist are the most chosen colours across Waverley; two-tone fences (one colour for sheets, another for posts and rails) cost no more. See the Colorbond colour chart for exact swatches.