Clovelly Fencing Contractor – Colorbond, Timber, Pool & Gates

Randwick, Coogee, Maroubra, Kensington, Kingsford, Matraville and La Perouse – beachside apartments, semi-detached Federation homes and post-war brick on sandy ground.

What we install in Clovelly

Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Fence and gate repairs – leaning posts, storm damage, insurance repairs and gates that will not latch

Local notes for Clovelly

Local conditions: coastal sand dunes and sandstone headlands; constant salt air east of Anzac Parade.

Pool fences at Maroubra, Malabar and South Coogee are aluminium to AS 1926.1.
Semi-detached and narrow blocks in Randwick and Kensington share long fences with one neighbour – we quote for both parties.
Salt spray is the design driver – aluminium tubular, slat or flat top for anything open, and Colorbond with stainless or coated fixings on side boundaries.

Clovelly straddles the boundary of Randwick City Council and Waverley Council; check which council your rates notice names before relying on either set of fence rules.

We are a service-area business: there is no showroom in Clovelly. We travel to you for a free measure and quote.

Free quote in Clovelly

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Randwick City Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Randwick City Council follows the codes with heritage conservation areas in Randwick, Kensington and Coogee controlling front fences. Council website.

All Randwick suburbs →

Nearby areas

All service areas →

Fencing questions in Clovelly

Do you service Clovelly?

Yes. Clovelly is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Clovelly?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Randwick City Council follows the codes with heritage conservation areas in Randwick, Kensington and Coogee controlling front fences. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Randwick City Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Clovelly neighbour, and can quote each side separately if you prefer.

How soon can you start in Clovelly?

Usually within one to two weeks of you accepting the quote, weather permitting. Most residential fences are finished in one to two and a half days.

Can you remove the old fence in Clovelly?

Yes – demolition and removal of the old timber, Colorbond or brick fence is itemised in the quote, including tipping. Bonded asbestos fencing is handled by a licensed removalist we arrange.