Narwee Fencing Contractor – Colorbond, Timber, Pool & Gates

Sydney's largest council by population after Blacktown – from the Cooks River suburbs of Earlwood and Campsie to the post-war streets of Bankstown, Revesby and Padstow and the river blocks of Picnic Point.

What we install in Narwee

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Fence height extensions – 300 mm or 600 mm louvre, lattice, slat or sheet toppers on your existing Colorbond posts
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Fence and gate repairs – leaning posts, storm damage, insurance repairs and gates that will not latch
Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use

Local notes for Narwee

Local conditions: flat to gently sloping with clay soils; older suburbs have brick front fences and long shared side boundaries.

Riverwood, Panania and Picnic Point blocks backing onto bushland use Colorbond for fire and termite resistance.
Two-tone Colorbond (for example Primrose sheets with a Monument frame) is popular and costs the same as one colour.
Duplex and granny-flat builds across Canterbury-Bankstown need new boundary fencing and often a 2.1 m fence for privacy – we advise on what is exempt.

We are a service-area business: there is no showroom in Narwee. We travel to you for a free measure and quote.

Free quote in Narwee

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Canterbury-Bankstown Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Canterbury-Bankstown Council applies the state rules; heritage conservation areas around Ashbury, Campsie and Bankstown have their own front-fence controls. Council website.

All Canterbury-Bankstown suburbs →

Nearby areas

All service areas →

Fencing questions in Narwee

Do you service Narwee?

Yes. Narwee is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Narwee?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Canterbury-Bankstown Council applies the state rules; heritage conservation areas around Ashbury, Campsie and Bankstown have their own front-fence controls. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Canterbury-Bankstown Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Narwee neighbour, and can quote each side separately if you prefer.

Can you remove the old fence in Narwee?

Yes – demolition and removal of the old timber, Colorbond or brick fence is itemised in the quote, including tipping. Bonded asbestos fencing is handled by a licensed removalist we arrange.

Which Colorbond colour suits Narwee?

Monument, Woodland Grey, Basalt and Surfmist are the most chosen colours across Canterbury-Bankstown; two-tone fences (one colour for sheets, another for posts and rails) cost no more. See the Colorbond colour chart for exact swatches.