Fencing Earlwood – Colorbond Fences, Gates & Extensions

Sydney's largest council by population after Blacktown – from the Cooks River suburbs of Earlwood and Campsie to the post-war streets of Bankstown, Revesby and Padstow and the river blocks of Picnic Point.

What we install in Earlwood

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Fence height extensions – 300 mm or 600 mm louvre, lattice, slat or sheet toppers on your existing Colorbond posts
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Fence and gate repairs – leaning posts, storm damage, insurance repairs and gates that will not latch
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates

Local notes for Earlwood

What we look for at the measure in Earlwood – flat to gently sloping with clay soils; older suburbs have brick front fences and long shared side boundaries.

Two-tone Colorbond (for example Primrose sheets with a Monument frame) is popular and costs the same as one colour.
Riverwood, Panania and Picnic Point blocks backing onto bushland use Colorbond for fire and termite resistance.
Duplex and granny-flat builds across Canterbury-Bankstown need new boundary fencing and often a 2.1 m fence for privacy – we advise on what is exempt.

We are a service-area business: there is no showroom in Earlwood. We travel to you for a free measure and quote.

Free quote in Earlwood

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Canterbury-Bankstown Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Canterbury-Bankstown Council applies the state rules; heritage conservation areas around Ashbury, Campsie and Bankstown have their own front-fence controls. Council website.

All Canterbury-Bankstown suburbs →

Nearby areas

All service areas →

Fencing questions in Earlwood

Do you service Earlwood?

Yes. Earlwood is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Earlwood?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Canterbury-Bankstown Council applies the state rules; heritage conservation areas around Ashbury, Campsie and Bankstown have their own front-fence controls. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Canterbury-Bankstown Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Earlwood neighbour, and can quote each side separately if you prefer.

Is the ground in Earlwood a problem for posts?

Flat to gently sloping with clay soils; older suburbs have brick front fences and long shared side boundaries. Where we hit rock we core the hole or use flanged posts; where levels differ we build a sleeper retaining wall under the fence. Both are priced up front.

Do you do supply only?

Yes. Colorbond panels, aluminium flat top and slat kits and gates can be supplied to Earlwood for you or your builder to install – ask for a supply-only price on the quote form.