Fence Installers Girraween (Cumberland) – Colorbond, Aluminium, Timber

Merrylands, Guildford, Auburn, Granville, Greystanes and Wentworthville – established post-war suburbs now filling with duplexes and townhouses, where almost every rebuild replaces the boundary fence.

What we install in Girraween

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Fence height extensions – 300 mm or 600 mm louvre, lattice, slat or sheet toppers on your existing Colorbond posts
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ
Fence and gate repairs – leaning posts, storm damage, insurance repairs and gates that will not latch
Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts

Local notes for Girraween

Local conditions: mostly flat Cumberland Plain clay; Greystanes and Pemulwuy rise onto Prospect Hill with sloping blocks.

Knock-down-rebuild and duplex projects around Merrylands and Guildford need new Colorbond on all three boundaries, usually at 1.8 m with a 2.1 m option behind the house.
Sliding driveway gates in Colorbond or slat suit the wider Greystanes and Pemulwuy frontages.
We have a long history of work in Merrylands, Toongabbie, Pendle Hill and Westmead – see the photo pages for those suburbs.

We are a service-area business: there is no showroom in Girraween. We travel to you for a free measure and quote.

Free quote in Girraween

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Cumberland City Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Cumberland City Council follows the codes; heritage areas in Granville, Auburn and Lidcombe have front-fence controls. Council website.

All Cumberland suburbs →

Nearby areas

All service areas →

Recent work near Girraween

Photos from our jobs in nearby Cumberland suburbs.

300 mm lattice Colorbond fence extension, Merrylands

Merrylands Pendle Hill Toongabbie Westmead

Fencing questions in Girraween

Do you service Girraween?

Yes. Girraween is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Girraween?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Cumberland City Council follows the codes; heritage areas in Granville, Auburn and Lidcombe have front-fence controls. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Cumberland City Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Girraween neighbour, and can quote each side separately if you prefer.

Can you remove the old fence in Girraween?

Yes – demolition and removal of the old timber, Colorbond or brick fence is itemised in the quote, including tipping. Bonded asbestos fencing is handled by a licensed removalist we arrange.

Do you do supply only?

Yes. Colorbond panels, aluminium flat top and slat kits and gates can be supplied to Girraween for you or your builder to install – ask for a supply-only price on the quote form.