Fence Installers Woolwich (Hunters Hill) – Colorbond, Aluminium, Timber

Sydney's smallest council by area – Hunters Hill, Woolwich, Henley, Boronia Park and Huntleys Point – sandstone villas, heritage streetscapes and river frontages.

What we install in Woolwich

Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ
Fence height extensions – 300 mm or 600 mm louvre, lattice, slat or sheet toppers on your existing Colorbond posts
Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates

Local notes for Woolwich

Local conditions: sandstone peninsula between the Lane Cove and Parramatta rivers; sloping blocks with rock close to the surface.

Almost the whole municipality is a heritage conservation area – front fences must suit the period, and we work with your architect or council's heritage adviser.
Side and rear boundaries are still Colorbond or lap-and-cap timber; access is often tight and downhill.
Aluminium and steel tubular front fencing in heritage profiles (spear or loop top) suits the sandstone villas and meets open-fence controls.

We are a service-area business: there is no showroom in Woolwich. We travel to you for a free measure and quote.

Free quote in Woolwich

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Hunters Hill Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Hunters Hill Council's conservation area covers most properties, so front fences and visible boundary fences generally need approval or must meet heritage controls. Council website.

All Hunters Hill suburbs →

Nearby areas

All service areas →

Fencing questions in Woolwich

Do you service Woolwich?

Yes. Woolwich is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Woolwich?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Hunters Hill Council's conservation area covers most properties, so front fences and visible boundary fences generally need approval or must meet heritage controls. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Hunters Hill Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Woolwich neighbour, and can quote each side separately if you prefer.

How soon can you start in Woolwich?

Usually within one to two weeks of you accepting the quote, weather permitting. Most residential fences are finished in one to two and a half days.

Can you remove the old fence in Woolwich?

Yes – demolition and removal of the old timber, Colorbond or brick fence is itemised in the quote, including tipping. Bonded asbestos fencing is handled by a licensed removalist we arrange.