Colorbond Fencing Henley – Fences, Gates & Repairs by a Licensed Fencer

Sydney's smallest council by area – Hunters Hill, Woolwich, Henley, Boronia Park and Huntleys Point – sandstone villas, heritage streetscapes and river frontages.

What we install in Henley

Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Fence height extensions – 300 mm or 600 mm louvre, lattice, slat or sheet toppers on your existing Colorbond posts
Fence and gate repairs – leaning posts, storm damage, insurance repairs and gates that will not latch
Security fencing – 2.1 m steel security panels, roll top and sliding gates for schools, churches and commercial sites

Local notes for Henley

Local conditions: sandstone peninsula between the Lane Cove and Parramatta rivers; sloping blocks with rock close to the surface.

Aluminium and steel tubular front fencing in heritage profiles (spear or loop top) suits the sandstone villas and meets open-fence controls.
Side and rear boundaries are still Colorbond or lap-and-cap timber; access is often tight and downhill.
Almost the whole municipality is a heritage conservation area – front fences must suit the period, and we work with your architect or council's heritage adviser.

We are a service-area business: there is no showroom in Henley. We travel to you for a free measure and quote.

Free quote in Henley

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Hunters Hill Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Hunters Hill Council's conservation area covers most properties, so front fences and visible boundary fences generally need approval or must meet heritage controls. Council website.

All Hunters Hill suburbs →

Nearby areas

All service areas →

Fencing questions in Henley

Do you service Henley?

Yes. Henley is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Henley?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Hunters Hill Council's conservation area covers most properties, so front fences and visible boundary fences generally need approval or must meet heritage controls. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Hunters Hill Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Henley neighbour, and can quote each side separately if you prefer.

Which Colorbond colour suits Henley?

Monument, Woodland Grey, Basalt and Surfmist are the most chosen colours across Hunters Hill; two-tone fences (one colour for sheets, another for posts and rails) cost no more. See the Colorbond colour chart for exact swatches.

Can you remove the old fence in Henley?

Yes – demolition and removal of the old timber, Colorbond or brick fence is itemised in the quote, including tipping. Bonded asbestos fencing is handled by a licensed removalist we arrange.