Fence Installers Wilberforce (Hawkesbury) – Colorbond, Aluminium, Timber

Windsor, Richmond, Pitt Town, McGraths Hill, Bligh Park and the acreage suburbs of Kurrajong, Glossodia and Wilberforce – a mix of new estates on the flats and rural-residential blocks on the ridges.

What we install in Wilberforce

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates
Fence and gate repairs – leaning posts, storm damage, insurance repairs and gates that will not latch
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ

Local notes for Wilberforce

Local conditions: flood-prone Hawkesbury River flats around Windsor, Richmond and Pitt Town Bottoms; sandstone ridges and bushfire-prone land north of the river.

New estates at Pitt Town, Vineyard and Bligh Park need standard 1.8 m Colorbond and side gates, often to a covenant colour.
Acreage blocks in Kurrajong, Glossodia and Oakville use Colorbond around the house yard with post-and-rail or tubular on the frontage.
Flood-liable land changes what is exempt and what should be built – open fencing that lets water through is often required on the flats.

We are a service-area business: there is no showroom in Wilberforce. We travel to you for a free measure and quote.

Free quote in Wilberforce

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Hawkesbury City Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Hawkesbury City Council has extensive flood and bushfire mapping and heritage precincts (Windsor, Richmond, Pitt Town) that can remove exempt status – check first. Council website.

All Hawkesbury suburbs →

Nearby areas

All service areas →

Fencing questions in Wilberforce

Do you service Wilberforce?

Yes. Wilberforce is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Wilberforce?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Hawkesbury City Council has extensive flood and bushfire mapping and heritage precincts (Windsor, Richmond, Pitt Town) that can remove exempt status – check first. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Hawkesbury City Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Wilberforce neighbour, and can quote each side separately if you prefer.

How soon can you start in Wilberforce?

Usually within one to two weeks of you accepting the quote, weather permitting. Most residential fences are finished in one to two and a half days.

Can you remove the old fence in Wilberforce?

Yes – demolition and removal of the old timber, Colorbond or brick fence is itemised in the quote, including tipping. Bonded asbestos fencing is handled by a licensed removalist we arrange.