Colorbond Fencing Oakville – Fences, Gates & Repairs by a Licensed Fencer

Windsor, Richmond, Pitt Town, McGraths Hill, Bligh Park and the acreage suburbs of Kurrajong, Glossodia and Wilberforce – a mix of new estates on the flats and rural-residential blocks on the ridges.

What we install in Oakville

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Security fencing – 2.1 m steel security panels, roll top and sliding gates for schools, churches and commercial sites
Fence and gate repairs – leaning posts, storm damage, insurance repairs and gates that will not latch

Local notes for Oakville

What we look for at the measure in Oakville – flood-prone Hawkesbury River flats around Windsor, Richmond and Pitt Town Bottoms; sandstone ridges and bushfire-prone land north of the river.

Acreage blocks in Kurrajong, Glossodia and Oakville use Colorbond around the house yard with post-and-rail or tubular on the frontage.
New estates at Pitt Town, Vineyard and Bligh Park need standard 1.8 m Colorbond and side gates, often to a covenant colour.
Flood-liable land changes what is exempt and what should be built – open fencing that lets water through is often required on the flats.

We are a service-area business: there is no showroom in Oakville. We travel to you for a free measure and quote.

Free quote in Oakville

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Hawkesbury City Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Hawkesbury City Council has extensive flood and bushfire mapping and heritage precincts (Windsor, Richmond, Pitt Town) that can remove exempt status – check first. Council website.

All Hawkesbury suburbs →

Nearby areas

All service areas →

Fencing questions in Oakville

Do you service Oakville?

Yes. Oakville is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Oakville?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Hawkesbury City Council has extensive flood and bushfire mapping and heritage precincts (Windsor, Richmond, Pitt Town) that can remove exempt status – check first. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Hawkesbury City Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Oakville neighbour, and can quote each side separately if you prefer.

Which Colorbond colour suits Oakville?

Monument, Woodland Grey, Basalt and Surfmist are the most chosen colours across Hawkesbury; two-tone fences (one colour for sheets, another for posts and rails) cost no more. See the Colorbond colour chart for exact swatches.

Can you remove the old fence in Oakville?

Yes – demolition and removal of the old timber, Colorbond or brick fence is itemised in the quote, including tipping. Bonded asbestos fencing is handled by a licensed removalist we arrange.