Colorbond Fencing Putney – Fences, Gates & Repairs by a Licensed Fencer

Ryde, West Ryde, Eastwood, Marsfield, Gladesville, North Ryde and Macquarie Park – post-war brick homes on generous blocks, rapid duplex and townhouse redevelopment, and river slopes to the south.

What we install in Putney

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Fence height extensions – 300 mm or 600 mm louvre, lattice, slat or sheet toppers on your existing Colorbond posts
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Security fencing – 2.1 m steel security panels, roll top and sliding gates for schools, churches and commercial sites
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts

Local notes for Putney

What we look for at the measure in Putney – undulating clay and shale; sloping blocks toward the Parramatta River at Putney, Gladesville and Meadowbank.

Duplex rebuilds in Ryde, West Ryde and Eastwood fence all boundaries in 1.8 m Colorbond, often with a slat front fence and gates.
Sloping river-side blocks use stepped Colorbond and sleeper retaining.
Marsfield is one of our photographed suburbs – Colorbond replacements, lattice inserts and gates.

We are a service-area business: there is no showroom in Putney. We travel to you for a free measure and quote.

Free quote in Putney

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

City of Ryde Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. City of Ryde follows the codes; heritage conservation areas around Eastwood, Gladesville and Ryde have front-fence controls. Council website.

All Ryde suburbs →

Nearby areas

All service areas →

Recent work near Putney

Photos from our jobs in nearby Ryde suburbs.

Marsfield

Fencing questions in Putney

Do you service Putney?

Yes. Putney is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Putney?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. City of Ryde follows the codes; heritage conservation areas around Eastwood, Gladesville and Ryde have front-fence controls. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only City of Ryde Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Putney neighbour, and can quote each side separately if you prefer.

Which Colorbond colour suits Putney?

Monument, Woodland Grey, Basalt and Surfmist are the most chosen colours across Ryde; two-tone fences (one colour for sheets, another for posts and rails) cost no more. See the Colorbond colour chart for exact swatches.

Do you do supply only?

Yes. Colorbond panels, aluminium flat top and slat kits and gates can be supplied to Putney for you or your builder to install – ask for a supply-only price on the quote form.