Fencing in City of Ryde Council – Colorbond, Aluminium & Timber Fences for Every Ryde Suburb

What we install in Ryde

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Fence height extensions – 300 mm or 600 mm louvre, lattice, slat or sheet toppers on your existing Colorbond posts
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ

Ground, access and local conditions

Undulating clay and shale; sloping blocks toward the Parramatta River at Putney, Gladesville and Meadowbank.

Marsfield is one of our photographed suburbs – Colorbond replacements, lattice inserts and gates.
Duplex rebuilds in Ryde, West Ryde and Eastwood fence all boundaries in 1.8 m Colorbond, often with a slat front fence and gates.
Sloping river-side blocks use stepped Colorbond and sleeper retaining.

Fence rules in City of Ryde Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. City of Ryde follows the codes; heritage conservation areas around Eastwood, Gladesville and Ryde have front-fence controls. Pool barriers must meet AS 1926.1-2012 regardless of council. Read our NSW pool fencing guide, and confirm anything about your own block with Ryde council.

Free quote anywhere in Ryde

Call or text 0421 233 434, or use the form below.

Request a quote 1-minute quick quote

Suburbs with project photos

Marsfield

Fences we have built in Ryde

Colorbond fence with lattice inserts, Marsfield

Every suburb in City of Ryde Council

Each has its own page with local notes, council rules and a quote form.

C D E G M N P R T W

Fencing questions in Ryde

Do you cover all of City of Ryde Council?

Yes – every suburb listed on this page. Travel is included in the quote and site measures are free.

What fence can I build in Ryde without approval?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. City of Ryde follows the codes; heritage conservation areas around Eastwood, Gladesville and Ryde have front-fence controls. Pool barriers must comply with AS 1926.1-2012 in every case. Confirm your property's zoning and overlays with council before you commit to a front fence.

What is different about fencing in Ryde?

Undulating clay and shale; sloping blocks toward the Parramatta River at Putney, Gladesville and Meadowbank.

How is a dividing fence cost shared?

Under the NSW Dividing Fences Act neighbours normally share the cost of a sufficient dividing fence equally; anything above a basic sufficient fence is paid by the owner who wants it. We provide a quote you can hand to your neighbour.