Fencing Port Hacking – Colorbond Fences, Gates & Extensions

The Shire – Cronulla, Caringbah, Miranda, Sutherland, Engadine, Menai and the Georges River and Port Hacking foreshores. Brick homes on good-sized blocks, a lot of pools and a lot of bushland boundaries.

What we install in Port Hacking

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates
Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ
Fence and gate repairs – leaning posts, storm damage, insurance repairs and gates that will not latch
Fence height extensions – 300 mm or 600 mm louvre, lattice, slat or sheet toppers on your existing Colorbond posts

Local notes for Port Hacking

Ground and access shape the price more than anything else in Port Hacking: sandstone plateau with bushland reserves on many rear boundaries; coastal sand and salt around Cronulla, Kurnell and the bays.

Pool fencing to AS 1926.1 and slat privacy screens are in constant demand across the Shire; we advise on gates, latches and the non-climbable zone.
Bush-backed blocks in Engadine, Menai, Illawong and Heathcote choose Colorbond for ember and termite resistance.
Salt air at Cronulla, Woolooware and the Port Hacking bays means aluminium for open and pool fencing.

We are a service-area business: there is no showroom in Port Hacking. We travel to you for a free measure and quote.

Free quote in Port Hacking

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Sutherland Shire Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Sutherland Shire Council follows the codes; foreshore, bushfire and heritage areas (Cronulla, Sutherland, Como) affect exemptions. Council website.

All Sutherland Shire suburbs →

Nearby areas

All service areas →

Fencing questions in Port Hacking

Do you service Port Hacking?

Yes. Port Hacking is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Port Hacking?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Sutherland Shire Council follows the codes; foreshore, bushfire and heritage areas (Cronulla, Sutherland, Como) affect exemptions. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Sutherland Shire Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Port Hacking neighbour, and can quote each side separately if you prefer.

Is the ground in Port Hacking a problem for posts?

Sandstone plateau with bushland reserves on many rear boundaries; coastal sand and salt around Cronulla, Kurnell and the bays. Where we hit rock we core the hole or use flanged posts; where levels differ we build a sleeper retaining wall under the fence. Both are priced up front.

How soon can you start in Port Hacking?

Usually within one to two weeks of you accepting the quote, weather permitting. Most residential fences are finished in one to two and a half days.