Sandy Point Fencing Contractor – Colorbond, Timber, Pool & Gates

The Shire – Cronulla, Caringbah, Miranda, Sutherland, Engadine, Menai and the Georges River and Port Hacking foreshores. Brick homes on good-sized blocks, a lot of pools and a lot of bushland boundaries.

What we install in Sandy Point

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates
Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Fence and gate repairs – leaning posts, storm damage, insurance repairs and gates that will not latch
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates

Local notes for Sandy Point

Local conditions: sandstone plateau with bushland reserves on many rear boundaries; coastal sand and salt around Cronulla, Kurnell and the bays.

Pool fencing to AS 1926.1 and slat privacy screens are in constant demand across the Shire; we advise on gates, latches and the non-climbable zone.
Salt air at Cronulla, Woolooware and the Port Hacking bays means aluminium for open and pool fencing.
Bush-backed blocks in Engadine, Menai, Illawong and Heathcote choose Colorbond for ember and termite resistance.

We are a service-area business: there is no showroom in Sandy Point. We travel to you for a free measure and quote.

Free quote in Sandy Point

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Sutherland Shire Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Sutherland Shire Council follows the codes; foreshore, bushfire and heritage areas (Cronulla, Sutherland, Como) affect exemptions. Council website.

All Sutherland Shire suburbs →

Nearby areas

All service areas →

Fencing questions in Sandy Point

Do you service Sandy Point?

Yes. Sandy Point is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Sandy Point?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Sutherland Shire Council follows the codes; foreshore, bushfire and heritage areas (Cronulla, Sutherland, Como) affect exemptions. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Sutherland Shire Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Sandy Point neighbour, and can quote each side separately if you prefer.

Can you remove the old fence in Sandy Point?

Yes – demolition and removal of the old timber, Colorbond or brick fence is itemised in the quote, including tipping. Bonded asbestos fencing is handled by a licensed removalist we arrange.

Do you do supply only?

Yes. Colorbond panels, aluminium flat top and slat kits and gates can be supplied to Sandy Point for you or your builder to install – ask for a supply-only price on the quote form.