Richmond Fencing Contractor – Colorbond, Timber, Pool & Gates

Windsor, Richmond, Pitt Town, McGraths Hill, Bligh Park and the acreage suburbs of Kurrajong, Glossodia and Wilberforce – a mix of new estates on the flats and rural-residential blocks on the ridges.

What we install in Richmond

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour

Local notes for Richmond

What we look for at the measure in Richmond – flood-prone Hawkesbury River flats around Windsor, Richmond and Pitt Town Bottoms; sandstone ridges and bushfire-prone land north of the river.

Flood-liable land changes what is exempt and what should be built – open fencing that lets water through is often required on the flats.
New estates at Pitt Town, Vineyard and Bligh Park need standard 1.8 m Colorbond and side gates, often to a covenant colour.
Acreage blocks in Kurrajong, Glossodia and Oakville use Colorbond around the house yard with post-and-rail or tubular on the frontage.

We are a service-area business: there is no showroom in Richmond. We travel to you for a free measure and quote.

Free quote in Richmond

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Hawkesbury City Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Hawkesbury City Council has extensive flood and bushfire mapping and heritage precincts (Windsor, Richmond, Pitt Town) that can remove exempt status – check first. Council website.

All Hawkesbury suburbs →

Nearby areas

All service areas →

Fencing questions in Richmond

Do you service Richmond?

Yes. Richmond is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Richmond?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Hawkesbury City Council has extensive flood and bushfire mapping and heritage precincts (Windsor, Richmond, Pitt Town) that can remove exempt status – check first. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Hawkesbury City Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Richmond neighbour, and can quote each side separately if you prefer.

Can you remove the old fence in Richmond?

Yes – demolition and removal of the old timber, Colorbond or brick fence is itemised in the quote, including tipping. Bonded asbestos fencing is handled by a licensed removalist we arrange.

Which Colorbond colour suits Richmond?

Monument, Woodland Grey, Basalt and Surfmist are the most chosen colours across Hawkesbury; two-tone fences (one colour for sheets, another for posts and rails) cost no more. See the Colorbond colour chart for exact swatches.