Naremburn Fencing Contractor – Colorbond, Timber, Pool & Gates

Chatswood, Artarmon, Naremburn, Willoughby, Castlecrag, Castle Cove and Northbridge – a mix of Federation and interwar homes, the Griffin-designed bushland suburbs and Chatswood's high-rise.

What we install in Naremburn

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ
Security fencing – 2.1 m steel security panels, roll top and sliding gates for schools, churches and commercial sites
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates

Local notes for Naremburn

What we look for at the measure in Naremburn – sandstone ridges and Middle Harbour gullies; rock close to the surface and bushland boundaries in Castlecrag and Castle Cove.

Castlecrag and Castle Cove have specific streetscape and landscape controls – low, open fencing and natural materials are expected on the frontage.
Chatswood and Artarmon duplex rebuilds fence all boundaries in Colorbond with slat gates to the street.
Rock is common – we core post holes or use flanged posts on sandstone.

We are a service-area business: there is no showroom in Naremburn. We travel to you for a free measure and quote.

Free quote in Naremburn

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Willoughby City Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Willoughby City Council applies the codes; the Castlecrag conservation area and other heritage streets have strict front-fence controls. Council website.

All Willoughby suburbs →

Nearby areas

All service areas →

Fencing questions in Naremburn

Do you service Naremburn?

Yes. Naremburn is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Naremburn?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Willoughby City Council applies the codes; the Castlecrag conservation area and other heritage streets have strict front-fence controls. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Willoughby City Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Naremburn neighbour, and can quote each side separately if you prefer.

How soon can you start in Naremburn?

Usually within one to two weeks of you accepting the quote, weather permitting. Most residential fences are finished in one to two and a half days.

Can you remove the old fence in Naremburn?

Yes – demolition and removal of the old timber, Colorbond or brick fence is itemised in the quote, including tipping. Bonded asbestos fencing is handled by a licensed removalist we arrange.