Fencing Castlecrag – Colorbond Fences, Gates & Extensions

Chatswood, Artarmon, Naremburn, Willoughby, Castlecrag, Castle Cove and Northbridge – a mix of Federation and interwar homes, the Griffin-designed bushland suburbs and Chatswood's high-rise.

What we install in Castlecrag

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ
Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Fence height extensions – 300 mm or 600 mm louvre, lattice, slat or sheet toppers on your existing Colorbond posts

Local notes for Castlecrag

What we look for at the measure in Castlecrag – sandstone ridges and Middle Harbour gullies; rock close to the surface and bushland boundaries in Castlecrag and Castle Cove.

Rock is common – we core post holes or use flanged posts on sandstone.
Castlecrag and Castle Cove have specific streetscape and landscape controls – low, open fencing and natural materials are expected on the frontage.
Chatswood and Artarmon duplex rebuilds fence all boundaries in Colorbond with slat gates to the street.

We are a service-area business: there is no showroom in Castlecrag. We travel to you for a free measure and quote.

Free quote in Castlecrag

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Willoughby City Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Willoughby City Council applies the codes; the Castlecrag conservation area and other heritage streets have strict front-fence controls. Council website.

All Willoughby suburbs →

Nearby areas

All service areas →

Fencing questions in Castlecrag

Do you service Castlecrag?

Yes. Castlecrag is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Castlecrag?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Willoughby City Council applies the codes; the Castlecrag conservation area and other heritage streets have strict front-fence controls. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Willoughby City Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Castlecrag neighbour, and can quote each side separately if you prefer.

Which Colorbond colour suits Castlecrag?

Monument, Woodland Grey, Basalt and Surfmist are the most chosen colours across Willoughby; two-tone fences (one colour for sheets, another for posts and rails) cost no more. See the Colorbond colour chart for exact swatches.

Is the ground in Castlecrag a problem for posts?

Sandstone ridges and Middle Harbour gullies; rock close to the surface and bushland boundaries in Castlecrag and Castle Cove. Where we hit rock we core the hole or use flanged posts; where levels differ we build a sleeper retaining wall under the fence. Both are priced up front.