Fencing Marrickville – Colorbond Fences, Gates & Extensions

Marrickville, Leichhardt, Balmain, Ashfield, Dulwich Hill, Newtown and Summer Hill – terraces, Federation cottages and warehouse conversions on narrow lots with rear lanes.

What we install in Marrickville

Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Fence height extensions – 300 mm or 600 mm louvre, lattice, slat or sheet toppers on your existing Colorbond posts
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Security fencing – 2.1 m steel security panels, roll top and sliding gates for schools, churches and commercial sites

Local notes for Marrickville

What we look for at the measure in Marrickville – undulating, clay soils, narrow side passages and rear lanes; many fences are shared along the full depth of the block.

Slat and louvre screens over existing fences are popular for privacy on tight blocks in Balmain, Rozelle and Marrickville.
Lane access is the norm – we carry Colorbond sheets in from the lane and plan the build around parking and neighbours.
Lap-and-cap timber suits the Federation and Victorian streetscapes of Haberfield, Summer Hill and Dulwich Hill; Colorbond in Monument is the low-maintenance choice on rear boundaries.

We are a service-area business: there is no showroom in Marrickville. We travel to you for a free measure and quote.

Free quote in Marrickville

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Inner West Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Inner West Council has many heritage conservation areas (Haberfield is entirely heritage-listed) with strict front-fence controls. Council website.

All Inner West suburbs →

Nearby areas

All service areas →

Fencing questions in Marrickville

Do you service Marrickville?

Yes. Marrickville is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Marrickville?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Inner West Council has many heritage conservation areas (Haberfield is entirely heritage-listed) with strict front-fence controls. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Inner West Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Marrickville neighbour, and can quote each side separately if you prefer.

Which Colorbond colour suits Marrickville?

Monument, Woodland Grey, Basalt and Surfmist are the most chosen colours across Inner West; two-tone fences (one colour for sheets, another for posts and rails) cost no more. See the Colorbond colour chart for exact swatches.

Do you do supply only?

Yes. Colorbond panels, aluminium flat top and slat kits and gates can be supplied to Marrickville for you or your builder to install – ask for a supply-only price on the quote form.