Fence Installers Warrawee (Ku-ring-gai) – Colorbond, Aluminium, Timber

Gordon, Killara, Lindfield, Pymble, Turramurra, St Ives and Wahroonga – the leafy Upper North Shore, with large heritage homes on big blocks and a steady stream of new builds and pool installations.

What we install in Warrawee

Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates
Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ
Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Fence height extensions – 300 mm or 600 mm louvre, lattice, slat or sheet toppers on your existing Colorbond posts

Local notes for Warrawee

What we look for at the measure in Warrawee – ridge-top suburbs with deep gullies; sandstone and clay, large trees along boundaries and many sloping rear yards.

Pool fencing and aluminium alternatives to glass are in constant demand in St Ives, Turramurra and Wahroonga; we build to AS 1926.1 and advise on the non-climbable zone.
Long, sloping rear boundaries in Killara and Pymble are stepped or retained; Colorbond in Woodland Grey and Monument blends into the bush setting.
Tree protection orders are taken seriously here – we set posts to avoid significant roots and tell you when an arborist is needed.

We are a service-area business: there is no showroom in Warrawee. We travel to you for a free measure and quote.

Free quote in Warrawee

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Ku-ring-gai Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Ku-ring-gai Council has extensive heritage conservation areas and strong tree-protection rules; low, open front fences are the norm and solid front fences generally need approval. Council website.

All Ku-ring-gai suburbs →

Nearby areas

All service areas →

Fencing questions in Warrawee

Do you service Warrawee?

Yes. Warrawee is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Warrawee?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Ku-ring-gai Council has extensive heritage conservation areas and strong tree-protection rules; low, open front fences are the norm and solid front fences generally need approval. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Ku-ring-gai Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Warrawee neighbour, and can quote each side separately if you prefer.

How soon can you start in Warrawee?

Usually within one to two weeks of you accepting the quote, weather permitting. Most residential fences are finished in one to two and a half days.

Can you remove the old fence in Warrawee?

Yes – demolition and removal of the old timber, Colorbond or brick fence is itemised in the quote, including tipping. Bonded asbestos fencing is handled by a licensed removalist we arrange.