Colorbond Fencing Potts Point – Fences, Gates & Repairs by a Licensed Fencer

The city and its inner suburbs – Surry Hills, Redfern, Newtown, Glebe, Alexandria, Zetland, Rosebery and Erskineville – terraces, warehouse conversions and new apartment precincts on very small lots.

What we install in Potts Point

Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Fence and gate repairs – leaning posts, storm damage, insurance repairs and gates that will not latch
Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ
Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile

Local notes for Potts Point

What we look for at the measure in Potts Point – flat to gently sloping; tiny rear yards, shared walls, rear lanes and minimal vehicle access.

Courtyard privacy is the usual brief – slat or louvre screens and 2.1 m fences where exempt.
Most City of Sydney jobs are small and access-critical – rear-lane gates, short Colorbond or timber boundaries and slat screens carried in by hand.
Heritage conservation areas cover most terrace streets; front fences are usually palisade or masonry and need approval to change.

We are a service-area business: there is no showroom in Potts Point. We travel to you for a free measure and quote.

Free quote in Potts Point

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

City of Sydney Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. City of Sydney's heritage conservation areas mean front fences on terrace streets generally need approval and must match the streetscape. Council website.

All City of Sydney suburbs →

Nearby areas

All service areas →

Fencing questions in Potts Point

Do you service Potts Point?

Yes. Potts Point is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Potts Point?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. City of Sydney's heritage conservation areas mean front fences on terrace streets generally need approval and must match the streetscape. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only City of Sydney Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Potts Point neighbour, and can quote each side separately if you prefer.

Do you do supply only?

Yes. Colorbond panels, aluminium flat top and slat kits and gates can be supplied to Potts Point for you or your builder to install – ask for a supply-only price on the quote form.

Is the ground in Potts Point a problem for posts?

Flat to gently sloping; tiny rear yards, shared walls, rear lanes and minimal vehicle access. Where we hit rock we core the hole or use flanged posts; where levels differ we build a sleeper retaining wall under the fence. Both are priced up front.