Elvina Bay Fencing Contractor – Colorbond, Timber, Pool & Gates

From Manly to Palm Beach and inland to Frenchs Forest, Belrose and Terrey Hills – beach suburbs with salt air, bushland suburbs on the plateau and a lot of pools.

What we install in Elvina Bay

Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates
Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ
Fence and gate repairs – leaning posts, storm damage, insurance repairs and gates that will not latch
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts

Local notes for Elvina Bay

What we look for at the measure in Elvina Bay – coastal sand and sandstone headlands on the beaches; bushfire-prone plateau suburbs inland with rock and large trees.

Belrose, Frenchs Forest and Terrey Hills blocks back onto bush – Colorbond for ember resistance and low maintenance.
Pool barriers to AS 1926.1 are a constant need on the Northern Beaches; we advise on gates, latches and the non-climbable zone.
Salt air on the beach suburbs (Dee Why, Narrabeen, Avalon, Newport) means aluminium for open fencing and pool fencing – we specify Colorbond fixings and post caps for boundary fences.

We are a service-area business: there is no showroom in Elvina Bay. We travel to you for a free measure and quote.

Free quote in Elvina Bay

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Northern Beaches Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Northern Beaches Council follows the state codes; foreshore, bushfire and heritage (Manly, Pittwater) overlays affect what is exempt. Council website.

All Northern Beaches suburbs →

Nearby areas

All service areas →

Fencing questions in Elvina Bay

Do you service Elvina Bay?

Yes. Elvina Bay is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Elvina Bay?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Northern Beaches Council follows the state codes; foreshore, bushfire and heritage (Manly, Pittwater) overlays affect what is exempt. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Northern Beaches Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Elvina Bay neighbour, and can quote each side separately if you prefer.

Do you do supply only?

Yes. Colorbond panels, aluminium flat top and slat kits and gates can be supplied to Elvina Bay for you or your builder to install – ask for a supply-only price on the quote form.

Which Colorbond colour suits Elvina Bay?

Monument, Woodland Grey, Basalt and Surfmist are the most chosen colours across Northern Beaches; two-tone fences (one colour for sheets, another for posts and rails) cost no more. See the Colorbond colour chart for exact swatches.