Bullaburra Fencing Contractor – Colorbond, Timber, Pool & Gates

The lower Blue Mountains villages from Lapstone to Springwood are within our regular travel; larger jobs further up the line are quoted case by case. Blocks are bigger, tree-lined and often steep.

What we install in Bullaburra

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ
Fence and gate repairs – leaning posts, storm damage, insurance repairs and gates that will not latch
Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour

Local notes for Bullaburra

What we look for at the measure in Bullaburra – sandstone ridges with shallow soil in places – post holes sometimes need coring – and bushfire-prone land on the edges of most villages.

Front fences are usually low and open to keep the leafy streetscape; heritage areas in Leura, Blackheath and Katoomba have specific controls.
Tree roots and rock are common on the ridge blocks – we allow for coring and stepped fences in the quote.
On bushfire-prone lots steel fencing and posts are the sensible choice; Colorbond does not add fuel load the way timber does.

We are a service-area business: there is no showroom in Bullaburra. We travel to you for a free measure and quote.

Free quote in Bullaburra

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Blue Mountains City Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Blue Mountains City Council has extensive heritage conservation areas and bushfire mapping that can change what is exempt – confirm before building. Council website.

All Blue Mountains suburbs →

Nearby areas

All service areas →

Fencing questions in Bullaburra

Do you service Bullaburra?

Yes. Bullaburra is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Bullaburra?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Blue Mountains City Council has extensive heritage conservation areas and bushfire mapping that can change what is exempt – confirm before building. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Blue Mountains City Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Bullaburra neighbour, and can quote each side separately if you prefer.

Can you remove the old fence in Bullaburra?

Yes – demolition and removal of the old timber, Colorbond or brick fence is itemised in the quote, including tipping. Bonded asbestos fencing is handled by a licensed removalist we arrange.

Which Colorbond colour suits Bullaburra?

Monument, Woodland Grey, Basalt and Surfmist are the most chosen colours across Blue Mountains; two-tone fences (one colour for sheets, another for posts and rails) cost no more. See the Colorbond colour chart for exact swatches.