Fence Installers Bilpin (Hawkesbury) – Colorbond, Aluminium, Timber

Windsor, Richmond, Pitt Town, McGraths Hill, Bligh Park and the acreage suburbs of Kurrajong, Glossodia and Wilberforce – a mix of new estates on the flats and rural-residential blocks on the ridges.

What we install in Bilpin

Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates
Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates
Fence height extensions – 300 mm or 600 mm louvre, lattice, slat or sheet toppers on your existing Colorbond posts
Retaining walls under fences – treated pine or aluminium sleeper walls built directly under the new fence where levels differ

Local notes for Bilpin

What we look for at the measure in Bilpin – flood-prone Hawkesbury River flats around Windsor, Richmond and Pitt Town Bottoms; sandstone ridges and bushfire-prone land north of the river.

Flood-liable land changes what is exempt and what should be built – open fencing that lets water through is often required on the flats.
Acreage blocks in Kurrajong, Glossodia and Oakville use Colorbond around the house yard with post-and-rail or tubular on the frontage.
New estates at Pitt Town, Vineyard and Bligh Park need standard 1.8 m Colorbond and side gates, often to a covenant colour.

We are a service-area business: there is no showroom in Bilpin. We travel to you for a free measure and quote.

Free quote in Bilpin

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Hawkesbury City Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Hawkesbury City Council has extensive flood and bushfire mapping and heritage precincts (Windsor, Richmond, Pitt Town) that can remove exempt status – check first. Council website.

All Hawkesbury suburbs →

Nearby areas

All service areas →

Fencing questions in Bilpin

Do you service Bilpin?

Yes. Bilpin is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Bilpin?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Hawkesbury City Council has extensive flood and bushfire mapping and heritage precincts (Windsor, Richmond, Pitt Town) that can remove exempt status – check first. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Hawkesbury City Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Bilpin neighbour, and can quote each side separately if you prefer.

How soon can you start in Bilpin?

Usually within one to two weeks of you accepting the quote, weather permitting. Most residential fences are finished in one to two and a half days.

Is the ground in Bilpin a problem for posts?

Flood-prone Hawkesbury River flats around Windsor, Richmond and Pitt Town Bottoms; sandstone ridges and bushfire-prone land north of the river. Where we hit rock we core the hole or use flanged posts; where levels differ we build a sleeper retaining wall under the fence. Both are priced up front.