Fence Installers Balmoral (Mosman) – Colorbond, Aluminium, Timber

Mosman, Balmoral, Beauty Point and Clifton Gardens – harbourside homes, steep streets and a strong emphasis on streetscape and views.

What we install in Balmoral

Aluminium fencing – rust-free flat top, vertical picket, blade and slat aluminium fencing for coastal and front-boundary use
Pool fencing – aluminium flat top and tubular barriers built to AS 1926.1-2012 with self-closing gates
Slat and louvre screens – aluminium horizontal slat, vertical slat and louvre fences, screens and gates in any powder-coat colour
Colorbond fencing – new boundary fences and replacements in 1.5 m to 2.4 m heights, any Colorbond colour, either sheet profile
Timber fencing – treated pine paling, lapped and lap-and-cap on galvanised steel posts
Security fencing – 2.1 m steel security panels, roll top and sliding gates for schools, churches and commercial sites
Gates – Colorbond single and double gates, slat, louvre, timber, pool and sliding or automatic driveway gates

Local notes for Balmoral

What we look for at the measure in Balmoral – steep sandstone slopes to Middle Harbour and Balmoral Beach; salt exposure on the harbour-facing streets.

Slat and louvre privacy screens are popular where neighbours overlook from above.
Sloping blocks call for stepped Colorbond or retaining walls; access via steps is common and allowed for in the price.
Salt air means aluminium over steel for open front fencing and pool fencing; Colorbond boundary fences are specified with the right fixings.

We are a service-area business: there is no showroom in Balmoral. We travel to you for a free measure and quote.

Free quote in Balmoral

Call or text 0421 233 434, or use the form below. Most quotes come back the same day.

Request a quote 1-minute quick quote

Mosman Council

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Mosman Council has heritage conservation areas and strong streetscape controls; front fences on most streets need to be low and open or approved. Council website.

All Mosman suburbs →

Nearby areas

All service areas →

Fencing questions in Balmoral

Do you service Balmoral?

Yes. Balmoral is inside our Sydney-wide service area and we quote there regularly. Site inspections and written quotes are free, and travel is included in the price.

Do I need council approval for a fence in Balmoral?

Under the NSW exempt development rules a boundary fence behind the building line can be up to 1.8 m high without approval on most residential lots. Mosman Council has heritage conservation areas and strong streetscape controls; front fences on most streets need to be low and open or approved. Pool barriers must comply with AS 1926.1-2012 regardless. We tell you what we see on site, but only Mosman Council can confirm what applies to your property.

How is a shared boundary fence paid for?

Under the NSW Dividing Fences Act adjoining owners generally share the cost of a sufficient dividing fence equally. We give you a copy of the quote to pass to your Balmoral neighbour, and can quote each side separately if you prefer.

Can you remove the old fence in Balmoral?

Yes – demolition and removal of the old timber, Colorbond or brick fence is itemised in the quote, including tipping. Bonded asbestos fencing is handled by a licensed removalist we arrange.

Is the ground in Balmoral a problem for posts?

Steep sandstone slopes to Middle Harbour and Balmoral Beach; salt exposure on the harbour-facing streets. Where we hit rock we core the hole or use flanged posts; where levels differ we build a sleeper retaining wall under the fence. Both are priced up front.