Colorbond
Panels, gates, inserts and components.
Supply only · installed
DIY fencing and gate centre
Everything we supply, grouped by type. Every item is available supply-only for DIY and trade, and most can be installed by us across Sydney.
Aluminium slat
Slat fencing, screens and gates.
Fence extensions
Louvre, lattice, slat and sheet kits.
Flat top fencing – aluminium & steel
Pool, garden and front fence panels.
Gates
Colorbond, slat and sliding gate kits.
Gate motors
Nice / Mhouse automation kits and accessories.
Security fencing
2.1 m steel security panels.
Louvre
Louvre screens, fencing and gates.
Timber fencing
Treated pine paling and lap & cap per metre.
Pool fencing, tubular & front fences
50+ tubular designs.
Sliding gates
Fabricated sliding gates, manual or automatic.
Pool & garden fencing
Aluminium pool fencing to the NSW standard.
Vertical picket fencing & gates
Vertical slat picket panels.
Fencing components, letterboxes, gate locks
Posts, rails, sheets, brackets, caps and locks.
Modular fencing
Complete panel kits ready to assemble.
Chain wire, crowd barriers, awnings, concrete sleepers, temporary fencing, shade structures, mesh fencing, window shutters and carports were listed on the previous version of this page – ask us and we will tell you whether we can help or refer you.
How we build
- We only use genuine Colorbond® steel made by BlueScope Steel Australia. Each sheet carries the laser-etched Colorbond insignia so you can check it yourself.
- All Colorbond colours cost the same, and choosing a different colour for the frame (posts and rails) than the sheets is also the same cost.
- Every post is set 600 mm into the ground with at least one full 20 kg bag of concrete per hole.
- Colorbond fencing can be built up to 2.4 m high. Fences over 1.8 m usually need council approval – ask us before you decide.
- Heritage-listed properties need council approval before a Colorbond fence can be built.
- We can remove an existing brick wall, old timber or Colorbond fence, and up to 10 m² of bonded asbestos fencing as part of a replacement.
- We can double-sheet a new fence or lattice so each side is a different colour. The frame stays one colour on both sides.
- A new 30 m Colorbond fence, including demolition and removal of the old fence, typically takes 1 to 2.5 days.
- If your ground level differs from your neighbour's, a treated pine (H4) sleeper retaining wall is built directly under the new fence.
- If you would like to go ahead with a quote, we arrange a free on-site visit and give you an estimated start date. Start dates depend on the weather.
- Pensioner discounts are available. We are fully insured and licensed (NSW Fencing Licence 269038C).
Welcome to call us outside normal business hours: 0421 233 434.
Ready for a free quote?
Send us your fence length, height and a couple of photos and Jye will come back to you with a preliminary price or arrange a free site inspection.